4K Ultra HD 600 MHz HDBaseT Extender w/ HDR, RS-232, 2-way IR, and POL

Product ID -GTB-UHD600-HBTL

Description

The Gefen GTB-UHD600-HBTL is a compact and high-performance solution for extending full-bandwidth HDMI 2.0 audio/video with HDR up to 40 meters (132 feet), over a CAT-5e or better cable. It supports 18.2 Gbps of data throughput and 600 MHz TMDS Clock frequency, the highest specified under the HDMI 2.0 standard. This extender uses HDBaseT™ technology along with Gefen’s visually lossless proprietary compression algorithms with very high PSNR (Peak Signal to Noise Ratio), to accommodate resolutions up to 4K Cinema-DCI (4096 x 2160 to 60 Hz 4:4:4) and 4K Ultra HD (3860 x 2160 to 60 Hz, 4:4:4) with HDR. High Dynamic Range (HDR) delivers greater contrast between light and dark areas of a video image, resulting in tremendous improvement in picture quality and color depth. HDCP 2.2 and the legacy HDCP 1.4 are both supported. The GTB-UHD600-HBTL also supports 1080p Full HD, WUXGA (1920 x 1200), 3DTV, and Deep Color (up to 1080p resolution). Highest performance multichannel digital audio including 7.1 channels of LPCM and HBR (High Bit Rate) digital audio formats, such as Dolby Atmos®, Dolby® TrueHD, DTS:X™, and DTS-HD Master Audio™ are passed through to the HDMI outputs. The GTB-UHD600-HBTL provides 2-way IR extension between the Sender and the Receiver units, facilitating the control .

Features

• Supports 18.2 Gbps bandwidth and 600 MHz TMDS clock
• Extends HDMI & Bi-Directional IR over a single CAT-5e/CAT-6A:
• 4K Ultra HD (3840 x 2160 to 60 Hz, 4:4:4), up to 132 feet/40 meters (8-bit color)
• 4K Cinema (DCI) (4096 x 2160 to 60 Hz 4:4:4), up to 132 feet/40 meters (8-bit color)
• 1080p Full HD (60 Hz) and WUXGA (1920 x 1200 to 60 Hz), up to 200 feet/60 meters (up to 12-bit Deep Color) 
• HDMI Features Supported:           
• HDMI 2.0 (full bandwidth to 18 Gbps/600 MHz)
• HDR (High Dynamic Range) 10-bit color at 4K 60 Hz 4:2:0 and 4K 24 Hz 4:4:4
• HDCP 2.2 and 1.4
• 12-bit Deep Color (at 1080p)
• Uncompressed LPCM digital audio up to 7.1 channels 
• HBR (High Bit Rate) digital audio up to 7.1 channels, including Dolby Atmos®, Dolby® TrueHD, DTS:Xâ„¢, and DTS-HD Master Audioâ„¢
• 3DTV pass-through
• CEC pass-through
• Lip Sync pass-through
• Supports the use of DVI sources and DVI displays up to 1080p Full HD and WUXGA (1920×1200), with Gefen CAB-DVI2HDMI-LCK DVI-to-HDMI cables (not included) 
• Gefen’s Bi-Directional POL provides power to the Sender or the Receiver unit over the link cable – only one side.

Specifications

Maximum TMDS Clock: 600 MHz Total Signal Bandwidth/Data Rate: 18.2 Gbps Video Input Connector (Sender): (1) HDMI Type A 19-pin, female, locking Video Output Connector (Receiver): (1) HDMI Type A 19-pin, female, locking Link Connector (Sender/Receiver): (1) RJ-45, shielded Gefen Syner-Gâ„¢ port (Sender): (1) 3-pin Phoenix Gefen Syner-Gâ„¢ port (Receiver): (1) 3-pin Phoenix IR In/Ext port (Sender/Receiver): (1) 3.5mm mini-stereo jack IR Extender type: EXT-RMT-EXTIRN IR Out port (Sender/Receiver): (1) 3.5mm mini-mono jack Power Indicator LED (Sender/Receiver): (1) Blue Link Indicator LED (Sender/Receiver): (1) Green HDMI-Active Indicator LED (Sender/Receiver): (1) Green Power Supply: (1) 12V DC, locking plug, 5.5mm barrel/2.1mm pin Power Consumption (Sender and Receiver combined): 14W maximum Operating Temperature: +32 to +113 °F (0 to +45 °C) Operating Humidity: 5% to 90% RH, non-condensing Storage Temperature: -4 to +185 °F (-20 to +85 °C) Storage Humidity: 0% to 95% RH, non-condensing MTBF: 50000 hours Dimensions (W x H x D, Sender/Receiver): 4.7â€� x 1â€� x 2.9â€� (119mm x 26mm x 73mm) Net Weight (Sender/Receiver): 0.3 lbs. (0.14 kg) each Shipping Weight.

Other Specifications