4K Ultra HD HDBaseT Extender

Product ID -GTB-UHD-HBTL

Description

The GTB-UHD-HBTL 4K Ultra HD Extender uses Gefen’s implementation of the HDBaseT™ technology to extend HDMI up to 230 feet/70 meters at 1080p and up to 130 feet/40 meters at 4K, using one CAT-5e or better cable. Resolutions up to 4K Ultra HD (3840 x 2160 @ 60 Hz 4:2:0) with 7.1 channels of HBR (High Bit Rate) lossless digital audio are supported. This product provides 2-way IR extension between the Sender and the Receiver units, facilitating the control of A/V sources placed near the Sender unit and sending automation commands to the display or another device placed near the Receiver unit. Gefen’s Bi-Directional POL (Power Over Line) technology powers the Sender or the Receiver unit using the same cable that extends the HDMI signal. Only one of the two units will need a power supply. This feature simplifies installation in cases when an electrical outlet may not be available near the source or the display. Small, low profile enclosures can be securely surface-mounted and conveniently hidden away from sight.

Notes:

1. Shielded (STP) CAT-5e or CAT-6A is recommended. Unshielded (UTP) CAT-5e or CAT-6A may be acceptable depending on cable quality but is not the preferred choice. Care should always be given to keep these cables away from power lines and other source.

Features

Extends HDMI and Bi-Directional IR over a single CAT-5e/CAT-6A:

• 4K Ultra HD (3840 x 2160 @ 60 Hz, 4:2:0), up to 130 feet/40 meters (8-bit color)
• 4K Ultra HD (3840 x 2160 @ 30 Hz, 4:4:4), up to 130 feet/40 meters (8-bit color)
• 4K Cinema (DCI) (4096 x 2160 @ 24 or 30 Hz 4:4:4), up to 130 feet/40 meters (8-bit color)
• 1080p Full HD (60 Hz), up to 230 feet/70 meters (up to 12-bit Deep Color) 

HDMI Features Supported: 

• HDMI 2.0
• HDCP 2.2 and 1.4
• 12-bit Deep Color
• LPCM 7.1, Dolby Atmos®, Dolby® TrueHD, DTS:Xâ„¢, and DTS-HD Master Audioâ„¢ pass-through
• 3DTV pass-through
• CEC pass-through
• Lip Sync pass-through

Specifications

Maximum Pixel Clock: 300 MHz Video Input Connector (Sender): (1) HDMI Type A 19-pin, female, locking Video Output Connector (Receiver): (1) HDMI Type A 19-pin, female, locking Link Connector (Sender/Receiver): (1) RJ-45, shielded IR Ext/In port (Sender/Receiver): (1) 3.5mm mini-stereo jack IR Extender type: EXT-RMT-EXTIRN IR Out port (Sender/Receiver): (1) 3.5mm mini-mono jack Power/Link Indicator LED (Sender/Receiver): (1) Bi-color: Blue/Green Power Supply: (1) 24V DC, locking Power Consumption (Sender and Receiver combined): 10W maximum Operating Temperature: +32 to +122°F (0 to +50 °C) Operating Humidity: 5% to 90% RH, non-condensing Storage Temperature: -4 to +185 °F (-20 to +85 °C) Storage Humidity: 0% to 95% RH, non-condensing MTBF: 50000 hours Dimensions (W x H x D, Sender/Receiver): 4.3″ x 1″ x 3.2″ (110mm x 26mm x 85mm) Net Weight (Sender/Receiver): 0.4 lbs. (0.2 kg) each Shipping Weight: 2.3 lbs. (1.1 kg).

Other Specifications