4K Ultra HD HDMI KVM over IP – Receiver Package

Product ID -EXT-UHDKA-LANS-RX

Description

Gefen’s AV over IP solutions continue our tradition of providing high performance, scalable, expandable, and secure AV routing and distribution over a standard Gigabit Local Area Network. Our Gen 2.0 KVM products offer enhanced performance, features, and functionality such as 4K Ultra HD with HDR support, built-in scalers, video-wall control, independent USB, RS-232, IR, and audio routing**, and backward-compatibility with our first generation products. Each Sender and Receiver extends and routes video, USB, 2-way audio, RS-232, and IR. 

The EXT-UHDKA-LANS-TX & RX feature maximum input resolution of 4K 60 Hz 4:2:0, and maximum output resolution of 4K 30 Hz 4:4:4. HDCP 2.2 and 1.4 are also supported. 7.1 channels of HBR (High Bit Rate) lossless and LPCM digital audio can pass through the system as well. 

The Sender unit features a video output for local monitoring of the source. USB, RS-232 2-way IR, and audio can be routed independently** between any Sender and Receiver unit, allowing end-users to control any of the sources and the displays within their network. With this greatly expanded array of new cutting-edge features and performance, the new Gefen AV over IP products.

Features

• Extends HDMI, USB, RS-232, 2-way analog audio, and IR, using a Gigabit Local Area Network
• Independent video, USB, RS-232, IR, and audio routing**
• Backward-compatible with first generation Gefen AV over IP products
• Supports input resolutions up to 4K 60Hz 4:2:0
• Supports output resolutions up to 4K 30Hz 4:4:4 
• Supported HDMI Features:
•  HDR
•  HDCP 2.2 and 1.4
•  Deep Color
•  Lip-Sync
• Uncompressed LPCM digital audio up to 7.1 channels 
• Up to 7.1 channels of HBR (High Bit Rate) digital audio including Dolby Atmos®, Dolby® TrueHD, DTS:Xâ„¢, and DTS-HD Master Audioâ„¢
• When used with Gefen DVI-to-HDMI cables (not included), supports the use of DVI sources and DVI displays up to 1080p Full HD and 1920×1200 (WUXGA)
• Video output on Sender unit for local monitoring of the source
• KM Emulation feature facilitates real-time, simultaneous Keyboard and Mouse control of each source from all connected workstations
• Integrated scaler ensures maximum compatibility and best possible viewing experience with different contents and displays
• Built-in video wall controller accommodates any number of rows and columns up to 16×16.

Specifications

Video Input connector (Sender): (1) HDMI Type A 19-pin, female, locking Video Output connector (Sender): (1) HDMI Type A 19-pin, female, locking Video Output connector (Receiver): (1) HDMI Type A 19-pin, female, locking Line Input (Sender): (1) 3.5mm mini-stereo jack Line Output (Sender): (1) 3.5mm mini-stereo jack Mic Input (Receiver): (1) 3.5mm mini-stereo jack Headphones/Line Output (Receiver): (1) 3.5mm mini-stereo jack Optical Digital Audio Output (Receiver): (1) TOSLINK® USB Host Interface port (Sender): (1) USB Type B, female USB Device ports (Receiver): (2) USB 2.0 Type A, female : (2) USB 1.1 Type A, female RS-232 port (Sender): (1) DB-9, female RS-232 port (Receiver): (1) DB-9, male IR Sensor (Receiver): (1) Located on front panel IR In/Ext (Sender/Receiver): (1) 3.5mm mini-stereo jack IR Out (Sender/Receiver): (1) 3.5mm mini-mono jack IR Extender type: EXT-RMT-EXTIRN Ethernet port (Sender): (1) RJ-45, shielded, PoE Ethernet ports (Receiver): (2) RJ-45, shielded, one with PoE Channel Up/USB-Request button (Receiver): (1) tact-type Channel Down button (Receiver): (1) tact-type Mode button (Sender): (1) tact-type, recessed.

Other Specifications