4K Ultra HD HDMI over IP – Receiver Package

Product ID -EXT-UHD-LANS-RX

Description

Gefen’s AV over IP solutions continue their tradition of providing high performance, scalable, expandable, and secure AV routing and distribution over a standard Gigabit Local Area Network. The Gen 2.0 KVM products offer enhanced performance, features, and functionality such as 4K Ultra HD with HDR support, built-in scalers, video-wall control, independent RS-232, IR, and audio routing**, and backward-compatibility with our first generation products. 

The EXT-UHD-LANS-TX & RX feature maximum input resolution of 4K 60 Hz 4:2:0, and maximum output resolution of 4K 30 Hz 4:4:4. HDCP 2.2 and 1.4 are also supported. 7.1 channels of HBR (High Bit Rate) lossless and LPCM digital audio can pass through the system as well. 

Video, RS-232 2-way IR, and audio can be routed independently** between any Sender and Receiver unit, allowing end-users to control any of the sources and the displays within their network. With this greatly expanded array of new cutting-edge features and performance, the new Gefen AV over IP products fully address the ever-growing needs of systems integrators. 

The Receiver features a built-in scaler to help optimize the image.

Features

• Extends HDMI, RS-232, analog audio, and IR, using a Gigabit Local Area Network
• Independent video, RS-232, IR, and audio routing**
• Backward-compatible with first generation Gefen AV over IP products
• Supports input resolutions up to 4K 60Hz 4:2:0
• Supports output resolutions up to 4K 30Hz 4:4:4 
• Supported HDMI Features:
•  HDR
•  HDCP 2.2 and 1.4
•  Deep Color
•  Lip-Sync
• Uncompressed LPCM digital audio up to 7.1 channels 
• Up to 7.1 channels of HBR (High Bit Rate) digital audio including Dolby Atmos®, Dolby® TrueHD, DTS:Xâ„¢, and DTS-HD Master Audioâ„¢
• When used with Gefen DVI-to-HDMI cables (not included), supports the use of DVI sources and DVI displays up to 1080p Full HD and 1920×1200 (WUXGA)
• Integrated scaler ensures maximum compatibility and best possible viewing experience with different contents and displays
• Built-in video wall controller accommodates any number of rows and columns up to 16×16
• Built-in Audio De-Embedder on Receiver breaks out 2 channel analog, 2 channel PCM, and up to 5.1 channels of Bitstream audio from the HDMI signal, allowing the audio content to be sent to external amplifiers and music distribution.

Specifications

Video Input connector (Sender): (1) HDMI Type A 19-pin, female, locking Video Output connector (Receiver): (1) HDMI Type A 19-pin, female, locking Line Input (Sender): (1) 3.5mm mini-stereo jack Line Output (Receiver): (1) 3.5mm mini-stereo jack Optical Digital Audio Output (Receiver): (1) TOSLINK® RS-232 port (Sender/Receiver): (1) 3.5mm stereo jack, female, DB-9 adaptor included IR In/Ext (Sender/Receiver): (1) 3.5mm mini-stereo jack IR Out (Sender/Receiver): (1) 3.5mm mini-mono jack IR Extender type: EXT-RMT-EXTIRN Ethernet port (Sender): (1) RJ-45, shielded, PoE Ethernet ports (Receiver): (2) RJ-45, shielded, one with PoE Channel Up button (Receiver): (1) tact-type Channel Down button (Receiver): (1) tact-type Mode button (Sender): (1) tact-type, recessed Reset button (Sender/Receiver): (1) tact-type, recessed Program button (Sender/Receiver): (1) tact-type, recessed Program Select switch (Sender/Receiver): (1) slide-type, recessed Link Indicator (Sender/Receiver): (1) LED, green Power Indicator (Sender/Receiver): (1) LED, blue Power Supply jack (Sender/Receiver): 5V DC, 2.5mm pin and 5.5mm barrel, locking Power Requirement (Sender/Receiver): 5V DC.

Other Specifications