Close
(0) items
You have no items in your shopping cart.
All Categories
    Filters
    Preferences
    Search
    Manufacturer: Gefen

    DVI FM 500 Extender

    €919.74
    €983.68
    Painless, reliable DVI extension over fiber — with built-in DVI-to-fiber signal converters and EDID storage, all in a tiny form factor!
    SKU: GEF_045
    Vendor: IIIOT_Gefen

    Product ID-EXT-DVI-FM500

    Description

    The Gefen  FM500  DVI Fiber Optic Extender allows DVI signal to be extended up to 5000 feet (1.5 km) away.  This extender is the ideal for installations where a DVI source and display are located apart from each other in an interference-prone operating environment. Two strands of LC-terminated fiber optic cable provides maximum extension and provides excellent protection from electromagnetic interference (EMI), and preserving signal integrity. The automatic  EDID programming feature enables quick and correct synchronization of the video source to the display without any manual configuration needed. This allows rapid recovery of picture upon display power up or when used in conjunction with Switchers and Matrixes.

    Video Support

    Supports resolutions up to 1920 x 1200

     

    Features

     

      • Extends DVI up to 5,000 feet (1500 meters) using single-mode(8/125 µm or 9/125 µm) fiber cable

     

      • Extends DVI up to 1,500 feet (450 meters) using multi-mode (50 µm or 62.5 µm) fiber cable

     

      • Supports resolutions up to 1920 x 1200

     

      • Supports DDWG standard for DVI-compliant monitors

     

      • EDID Programming feature enables quick and correct sync of source to display

     

      • Fully supports DVI 1.0 and DDC2B via virtual DDC

     

      • Supports both singlemode and multimode fiber optic cable types

     

    • Fiber cable provides immunity from electromagnetic interference (EMI)

     

     

    Specifications

    Maximum Pixel Clock: 165MHz

    Input Video Signal: 1.2V p-p

    Input DDC Signal: 5V p-p (TTL)

    Supported fiber types: single-mode 89µm (5000 feet) or multi-mode 50/62.5µm (1500 feet)

    Default EDID: UXGA (1600 x 1200)

    Video Input Connector (Sender): (1) DVI-D (19 pin), male (digital only)

    Video Output Connector (Receiver): (1) DVI-D (19 pin), male (digital only)

    Link Connectors (Sender / Receiver): (2) Type LC (1 Duplex) fiber connectors

    LED Indicators (Sender / Receiver): (1) EDID Status

    Program Button (Sender): EDID Program (recessed)

    Fiber Cable: Duplex, LC-terminated, Single-Mode or Multi-Mode (OM1 (62.5/125µm), or OM2/OM3/OM3e/OM4 (50/125µm))

    Power Supply (Receiver): 5V DC (Second power supply included for use if source does not provide 5V power for Sender over DVI connector)

    Power Consumption: 2.5W (max.)

    Operating Temperature: 0°C – 50°C

    Storage Temperature: -10°C – 85°C

    Operating Humidity: 5% – 85%

    Dimensions (Sender / Receiver): 1.5" W x 2.5" D x 0.5" H

    Shipping Weight: 2 lbs.

     

     

    Other Specifications

    Shipping Info
    • Length9.1 (Inches)
    • Width5.2 (Inches)
    • Height2.5 (Inches)
    • Weight1.05 (Lbs)
    • UPC845344008295
    Other Specifications
    • Maximum Pixel Clock: 165MHz
    • Input Video Signal: 1.2V p-p
    • Input DDC Signal: 5V p-p (TTL)
    • Supported fiber types: single-mode 89µm (5000 feet) or multi-mode 50/62.5µm (1500 feet)
    • Default EDID: UXGA (1600 x 1200)
    • Video Input Connector (Sender): (1) DVI-D (19 pin), male (digital only)
    • Video Output Connector (Receiver): (1) DVI-D (19 pin), male (digital only)
    • Link Connectors (Sender / Receiver): (2) Type LC (1 Duplex) fiber connectors
    • LED Indicators (Sender / Receiver): (1) EDID Status
    • Program Button (Sender): EDID Program (recessed)
    • Fiber Cable: Duplex, LC-terminated, Single-Mode or Multi-Mode (OM1 (62.5/125µm), or OM2/OM3/OM3e/OM4 (50/125µm))
    • Power Supply (Receiver): 5V DC (Second power supply included for use if source does not provide 5V power for Sender over DVI connector)
    • Power Consumption: 2.5W (max.)
    • Operating Temperature: 0°C – 50°C
    • Storage Temperature: -10°C – 85°C
    • Operating Humidity: 5% – 85%
    • Dimensions (Sender / Receiver): 1.5" W x 2.5" D x 0.5" H
    • Shipping Weight: 2 lbs.
    In The Box
    • DVI FM 500 Sender unit(1)
    • DVI FM 500 Receiver unit(1)
    • 5V DC Power Supply (EXT-PS51AIP-1.3)(2)
    • User Manual(1)

     

    Warranty

    2 year product warranty

    Write your own review
    • Product can be reviewed only after purchasing it
    • Only registered users can write reviews
    *
    *
    • Bad
    • Excellent
    *
    *
    *
    *

    Product ID-EXT-DVI-FM500

    Description

    The Gefen  FM500  DVI Fiber Optic Extender allows DVI signal to be extended up to 5000 feet (1.5 km) away.  This extender is the ideal for installations where a DVI source and display are located apart from each other in an interference-prone operating environment. Two strands of LC-terminated fiber optic cable provides maximum extension and provides excellent protection from electromagnetic interference (EMI), and preserving signal integrity. The automatic  EDID programming feature enables quick and correct synchronization of the video source to the display without any manual configuration needed. This allows rapid recovery of picture upon display power up or when used in conjunction with Switchers and Matrixes.

    Video Support

    Supports resolutions up to 1920 x 1200

     

    Features

     

      • Extends DVI up to 5,000 feet (1500 meters) using single-mode(8/125 µm or 9/125 µm) fiber cable

     

      • Extends DVI up to 1,500 feet (450 meters) using multi-mode (50 µm or 62.5 µm) fiber cable

     

      • Supports resolutions up to 1920 x 1200

     

      • Supports DDWG standard for DVI-compliant monitors

     

      • EDID Programming feature enables quick and correct sync of source to display

     

      • Fully supports DVI 1.0 and DDC2B via virtual DDC

     

      • Supports both singlemode and multimode fiber optic cable types

     

    • Fiber cable provides immunity from electromagnetic interference (EMI)

     

     

    Specifications

    Maximum Pixel Clock: 165MHz

    Input Video Signal: 1.2V p-p

    Input DDC Signal: 5V p-p (TTL)

    Supported fiber types: single-mode 89µm (5000 feet) or multi-mode 50/62.5µm (1500 feet)

    Default EDID: UXGA (1600 x 1200)

    Video Input Connector (Sender): (1) DVI-D (19 pin), male (digital only)

    Video Output Connector (Receiver): (1) DVI-D (19 pin), male (digital only)

    Link Connectors (Sender / Receiver): (2) Type LC (1 Duplex) fiber connectors

    LED Indicators (Sender / Receiver): (1) EDID Status

    Program Button (Sender): EDID Program (recessed)

    Fiber Cable: Duplex, LC-terminated, Single-Mode or Multi-Mode (OM1 (62.5/125µm), or OM2/OM3/OM3e/OM4 (50/125µm))

    Power Supply (Receiver): 5V DC (Second power supply included for use if source does not provide 5V power for Sender over DVI connector)

    Power Consumption: 2.5W (max.)

    Operating Temperature: 0°C – 50°C

    Storage Temperature: -10°C – 85°C

    Operating Humidity: 5% – 85%

    Dimensions (Sender / Receiver): 1.5" W x 2.5" D x 0.5" H

    Shipping Weight: 2 lbs.

     

     

    Other Specifications

    Shipping Info
    • Length9.1 (Inches)
    • Width5.2 (Inches)
    • Height2.5 (Inches)
    • Weight1.05 (Lbs)
    • UPC845344008295
    Other Specifications
    • Maximum Pixel Clock: 165MHz
    • Input Video Signal: 1.2V p-p
    • Input DDC Signal: 5V p-p (TTL)
    • Supported fiber types: single-mode 89µm (5000 feet) or multi-mode 50/62.5µm (1500 feet)
    • Default EDID: UXGA (1600 x 1200)
    • Video Input Connector (Sender): (1) DVI-D (19 pin), male (digital only)
    • Video Output Connector (Receiver): (1) DVI-D (19 pin), male (digital only)
    • Link Connectors (Sender / Receiver): (2) Type LC (1 Duplex) fiber connectors
    • LED Indicators (Sender / Receiver): (1) EDID Status
    • Program Button (Sender): EDID Program (recessed)
    • Fiber Cable: Duplex, LC-terminated, Single-Mode or Multi-Mode (OM1 (62.5/125µm), or OM2/OM3/OM3e/OM4 (50/125µm))
    • Power Supply (Receiver): 5V DC (Second power supply included for use if source does not provide 5V power for Sender over DVI connector)
    • Power Consumption: 2.5W (max.)
    • Operating Temperature: 0°C – 50°C
    • Storage Temperature: -10°C – 85°C
    • Operating Humidity: 5% – 85%
    • Dimensions (Sender / Receiver): 1.5" W x 2.5" D x 0.5" H
    • Shipping Weight: 2 lbs.
    In The Box
    • DVI FM 500 Sender unit(1)
    • DVI FM 500 Receiver unit(1)
    • 5V DC Power Supply (EXT-PS51AIP-1.3)(2)
    • User Manual(1)

     

    Warranty

    2 year product warranty

    Product tags