• Extend optical and coaxial digital audio signals up to distances of 300m over a single CAT cable
• Supports distances of up to 192kHz - 100m, 96kHz - 150m, 48kHz - 300m
• Optical and coaxial digital signal can both be distributed at the same time
• Built in DAC (Digital to Analog Converter) converts either optical or coaxial digital (selectable) to analog stereo left/right audio output (PCM only)
• Active solution powered only at the receiver unit. The Xantech transmitter receives power over the CAT cable.
• Supports LPCM, DTS, Dolby Digital and Dolby Digital Plus when used as a straight digital in/digital out extender
• Supports sample rates 32 kHz, 44.1 kHz, 48 kHz, 96 kHz and 192 kHz up to 24-bit resolution
• Ultra low jitter and high fidelity design
• Plug-and-play
• Small compact size
* Does not down-mix Dolby / DTS / multi-channel audio signal.
Specifications
- Transmitter
- Audio Input Connectors1x Optical (SPDIF) & 1x RCA (SPDIF)
- Output Connectors1x RJ45
- Receiver
- Input Connectors1x RJ45 & 5V / 1A DC
- Output Connectors1x Optical (SPDIF), 1x RCA (SPDIF) & 1x Analog left/right - 3.5mm stereo audio jack
- Extender Dimensions (WxDxH)65 x 80 x 25mm (with connections)
- Extender Dimensions (WxDxH)65 x 70 x 25mm (without connections)
- Ind. Extender Weight0.13kg (excluding accessories)
- Carton / Box Dimensions (WxDxH)210 x 125 x 95mm
- Shipping Weight0.6kg
- Operating Temperature32°F to 104°F (0°C to 40°C)
- Storage Temperature-4°F to 140°F (-20°C to 60°C)
- Power Supply5V / 1A DC, barrel type connector
- Power supplied to the Transmitter unit from the Receiver
Warranty
Xantech XT-CAT-ARC-KIT Warranty